Enhanced X-axis motion for up to a 20% increase in throughput over previous models1
Unlike single-use cartridges, this system allows for 100% utilization of available ink.
Programmable and automatic circulation of the main white ink vessel.
The ACS is designed to diminish the curing of ink in print head nozzles when printing on reflective, shiny and/or mirrored (RSM substrates) surfaces through a precise combination of firmware, reflectors, sensors, and software settings.
Print any combination of two or three of RIP 9's groups of white, color and clear print head channels simultaneously, inline in a single pass.
LED sensors automatically adjust head height to reduce print head strikes.
Produce 3-dimensional prints for a unique look and feel along with standard flat prints.
Combine this printer with DCS's Color Byte RIP 9 software, add-on ADA Module and InkMark™ UV Metal Matte-Finish substrates, InkMark™ UV Acrylic substrates, or standard Cast Acrylic using our Adhesion Promoter to quickly and economically create signage that complies with federal ADA guidelines via a DCS patent-pending UV printing process2.
Print on substrates from 0" to 15" (381mm) thick, weighing up to 30 lbs. (13.6 kg). 3
3.5" (89mm) Color LCD Touch Screen Display provides interactive feedback, on-demand printer status and ink levels.
Print on wood, metals, ceramic tiles, plastics, glass, industrial parts, promotional products and so much more!
10" x 24" (254mm x 610mm)
Provides industry-leading print quality.
Y-axis absolute positioning accuracy and repeatability of ±0.0015" (.038mm) when utilizing the heavy-duty Y-axis module.
Outstanding solvent and abrasion durability – 6-color ink set, including clear and white. White UV ink creates a very opaque image, allowing you to print vibrant colors onto virtually any colored or transparent substrate.
|High Speed||1440 x 720||Color Only||4,645||2.99|
|High Speed||1440 x 720||Color and White Inline||2,700||1.74|
Cycle times represented above have been printed and timed using default print modes and are good faith estimates only. The data represents printing times only and does not include any RIP processing time. Actual times may vary based on computer speed, memory, etc.
*Based on data collected from published literature and/or electronic sites as of 10/15/13
2 While the components of the ADA signage, produced on Direct Jet printers, have tested to be in compliance with federal USA ADA signage guidelines outlined in the 2010 ADA Standards for Accessible Design (Department of Justice - September 15, 2010 - www.ADA.gov), it is the responsibility of the signage manufacturer to ensure compliance with the governing local, state and federal authorities.
3 Maximum substrate thickness of 6” (152 mm) and maximum substrate weight of 10 lbs. (4.5 kg) accepted on standard models.
Contact DCS or your nearest Authorized Representative today for additional information, to receive custom samples or to schedule a demonstration of these tabletop/desktop UV printers.