Printable Garment Transfer Material & Equipment
For Flex33x and Direct Jet Printers
GTM is DCS's garment transfer material, available in both sheet for the Direct Jet flatbed solvent printers and roll format for the Flex33x printers. Images are designed and printed "right-reading." There is no need to mirror the image. After 24 hours, the garment can be washed and ironed. DCS's GTM is suitable for:
- Cotton
- Polyester
- Acrylic
- Blended garments
For more information about printing and applying durable, full-color, full-bleed garment transfers using your Flex33x or Direct Jet printer – including sample photos and an instructional video – visit our Garment/Textile Printing application page.
† Color Byte software prints registration marks on the media that allow the image to be cut on commercial cutters that have optical eye sensing technology.
Sample Cost
| Image | Image Size | Material | Material Cost | Masking Cost | Ink Type | Ink Cost | Total Cost* |
|---|---|---|---|---|---|---|---|
 |
4" x 4.5" | GTM Sheet FS-DJ-TRANS-25 | $0.32 (assuming 8 on a sheet) | $0.05 | IR4 | $0.02 | $0.39 |
 |
3.33" x 4" | GTM Roll FM-DRKSOL-1225 | $0.27 (assuming 6 on a 9" feed) | $0.04 | IR8 | $0.05 | $0.36 |
* Not including garment.
GTM Specifications
| GTM Sheet | GTM Roll | |
|---|---|---|
| Use With | Direct Jet Flatbed Printers | Flex33x Roll Media Printers |
| Code | FS-DJ-TRANS-10 (10 pack) FS-DJ-TRANS-25 (25 pack) |
FM-DRKSOL-1225 |
| Size | 11" x 17" (279mm x 432mm) | 12" x 25' (309mm x 7.6m) |
| Cutting | 45° blade with approximately 70 grams of force | 45° blade with approximately 70 grams of force |
| Press Temperature | 150° - 170°C (302° - 335°F) | 191°C (375°F) |
| Press Time | 20-30 seconds | 20 seconds |
| Wash | After 24 hours | After 24 hours |
| Iron | Inside only, avoid the transfer | Inside only, avoid the transfer |
| Dry Clean | No | No |
| Storage | Up to one year in a dry room, 15° - 30°C (59° - 86°F). Keep protected from sunlight and excessive humidity. | Up to one year in a dry room, 15° - 30°C (59° - 86°F). Keep protected from sunlight and excessive humidity. |
Garment Transfer Equipment
| Code | Description |
|---|---|
| DJ-1309/1314/1324 | Direct Jet Flatbed Solvent Printer with Automatic Height Adjust |
| DJ-2-17 | Direct Jet Flatbed Solvent Printer with Manual Height Adjust |
| Flex33x | Flexible Media Printer |
| EQ-ROBOPRO | Graphtec Craft Robo Pro Vinyl Cutter |
| DCS-DK20S | Heat Press 16" x 20" Swinger (110V or 220V) |
| DCS-JP14 | Heat Press 12" x 14" Swinger (110V or 220V) |
Garment Transfer Accessories
| Code | Description |
|---|---|
| FM-FXETEFLONSHT | Teflon Sheet 18" x 20" |
| FM-TEXSICM15150 | High Tack Clear ColorMask 15" x 150' (for use with heat press) |
| FM-HTTK1000 | Vinyl Weeding Tool Kit |
| AC-SQUEEGEE | Vinyl Squeegee |
| AC-SLEEVE-SQG | Felt Sleeve for Squeegee |