Fabrication Equipment
 

			Guillotine-3001 This guillotine is rugged enough to cut both plastics and metals. Be sure to purchase the appropriate blade for each type of substrate you are going to fabricate. Unlike most other guillotines/shears that only cut from one axis point on either end, the 3001 model cuts evenly across from a continuous axis point. Thereby insuring the best quality edge and a square cut. Code Description EQ-3001-(PL or MT) 13" Guillotine-specify plastic or metal blades EQ-3001UB-(PL or MT) Replacement 13" upper blade - specify plastic or metal blade EQ-3001LB-(PL or MT) Replacement 13" lower blade - specify plastic or metal blade
			Shear-1001 This small shear is light weight and portable. Great for small parts or taking it to on site production projects. Handles up to a 4" width. Code Description EQ-1001-(PL or MT) 4" Shear - specify plastic or metal blade EQ-1001UB-(PL or MT) Replacement 4" upper blade - specify plastic or metal blade EQ-1001LB-(PL or MT) Replacement 4" lower blade - specify plastic or metal blade
			Corner Die Base-CM40A This Die Base is very flexible allowing for change over of many different dies including, corner rounders, slot punch, holes, decorative corners, etc. Code Description EQ-CM40A DCS Corner Die Base EQ-CM40A-CNR+size Corner Rounder - 1/8", 3/16", 1/4", 5/16", 3/8", 1/2", 3/4", 1" EQ-CM40A-NTC+size Notch - 1/8", 3/16", 1/4", 3/8", 1/2", 3/4", 1" EQ-CM40A-SCP+size Scallop - 1/4", 3/8", 1/2" EQ-CM40A-DCT+size Decorative - 3/8", 1/2", 5/8" EQ-CM40A-CMF+size Chamfer - 1/4" EQ-CM40A-AHP+size Adjustable Hole Punch - 3/32", 1/8" EQ-CM40A-OMT+size Ornamental - 3/8", 1/2", 5/8" EQ-CM40A-SLT+size Slot - 1/8"x9/16" & 1/4"x9/16"
			Slot Punch Hand punch for .030" thick cards only.    Code Color  EQ-102 Metal
			1224 Input Guide DCS 1224 Input Tray Fixed Guide Kit    Code Color  EQ-1224 SUPPORTGUIDE Metal

Homepage          About Direct Color Systems          Products          Support          Leasing          Contact Us